Installation Dimensions
| Model | 200EH1-14 | 250EH1-15 |
|---|---|---|
|
Tank volume |
195L |
246L |
|
Rated voltage/ frequency |
220V~240V/50Hz |
220V~240V/50Hz |
|
Tank rated pressure |
0.7MPa |
0.7MPa |
|
Corrosion protection |
Magnesium rod |
Magnesium rod |
|
Insulation Protection Rating |
IPX4 |
IPX4 |
|
Type of system |
Monobloc air source heat pump |
Monobloc air source heat pump |
|
COP@7 ℃ |
3.04 |
3.02 |
|
COP@15 ℃ |
3.39 |
3.41 |
|
Tapping cycle |
L |
L |
|
Auxiliary heating element |
1500W |
1500W |
|
Rated power input by heat pump |
495W |
495W |
|
Maximum power input by heat pump |
865W |
865W |
|
Maximum power input |
1500W |
1500W |
|
Standby power input/ Pes |
35W |
35W |
|
Heating up time (7°C) |
5.50h |
7.35h |
|
Heating up time (15°C) |
4.68h |
6.17h |
|
Default temperature setting |
55°C |
55°C |
|
Temperature setting range – with heater |
35°C – 75°C |
35°C – 75°C |
|
Max working pressure of refrigerant |
0.8/2.8MPa |
0.8/2.8MPa |
|
Refrigerant type / weight |
R134a/0.9kg |
R134a/0.9kg |
|
Sound power level |
57dB |
58dB |
|
STC Zone |
Zone 1 – 4 |
Zone 1 – 5 |
|
Ambient temp. operating range of heat pump |
-7 – 45°C |
-7 – 45°C |
|
Water inlet and outlet connection |
G3/4″F |
G3/4″F |
|
Safety valve connection |
G3/4″F |
G3/4″F |
|
Drain & Water inlet connection |
G3/4″F |
G3/4″F |
|
Product Dimensions (mm) |
600x629x1692 |
600x629x1987 |
|
Packing dimension without pallet (mm) |
736x695x1810 |
736x695x2120 |
|
Packing dimension with pallet (mm) |
736x695x1940 |
736x695x2250 |
|
Packing dimension with pallet (mm) |
736x695x1940 |
736x695x2250 |
|
Net/Gross weight |
91/103kg |
102/115kg |
Electrical Requirements
- Requires a minimum 10amp circuit
- Rate voltage/frequency 220v~240v/50Hz
- The water heater and electrical supply are properly grounded
- A correctly sized overload protection device is installed
Plumbing & Restraint Diagrams
